Milking machine KhZDO UID-20 M115 Goat

Milking machine KhZDO UID-20 M115 Goat

Complete set:
Milking cups made of polycarbonate with silicone rubber;
Standard silicone hoses of 2 m;
Aluminum bucket for 20 l;
Aluminum bucket lid;
Synchronous milking system.

The main advantage of the milking machine UID-20 M115 Goat is its lightweight milking cups. Since with heavy milking cups the udder of goats and sheep is strongly pulled, they become painful and the milking process is disrupted. There is also a special valve on the milking cups that automatically closes when the system falls and prevents debris and dirt from being sucked from the floor into the milk can.
The UID-20 M115 Koza milking machine is designed for farmers who keep a large number of goats and sheep.

The UID-20 M115 goat milking machine has a capacity of 22.5 cubic meters / hour. The pump is located between two side plates and is 115 mm wide, and the pump itself is oil. The engine has a power of 750 W, it is low-speed, traction at 1500 rpm. Due to this, it has a higher torque compared to other milking machines, due to this, it scrolls the pump itself more.

The wheels in the UID-20 M115 Koza milking machine are made of high-quality plastic and solid rubber. Such wheels are a good replacement for metal wheels that are afraid of rust.
The noise level in this milking machine reaches 55 dB, it is not very quiet, goats and sheep need some time to get used to it, but the high noise level is due to the low-speed engine and large pump.

Operation of the milking machine UID-20 M115 Goat
The machine can be operated for 1 hour without stopping, if necessary, it can work up to 2-3 hours. After using the machine for more than an hour, it is necessary to check the temperature regime. This machine can be used all year round, but when the temperature drops below +5C, the oil in the pump thickens, for the pump to work correctly, it takes some time to warm up the machine before connecting it to the milking buckets. It is recommended not to keep the milking machine outside at very low temperatures, so that the machine will serve you for many years.