Milking machine KhZDO UID-20 M115 Two goats in 1 bucket

Milking machine KhZDO UID-20 M115 Two goats in 1 bucket

Complete set:
Milking cups are made of polycarbonate and silicone rubber;
Standard silicone hoses of 2 m;
Aluminum bucket for 20 l;
Polycarbonate bucket lid;
Milking system in pairs.

One of the important components of the milking machine UID-20 M115 two goats in one bucket is its lightweight milking cups. When the milking cups are heavy, the udder of goats and sheep can be pulled strongly, because of this they are in pain and the milking process itself is disrupted. The milking cups also have a special valve that automatically closes when the system falls and prevents debris and dirt from being sucked from the floor into the milk can.
The UID-20 M115 two goats in one bucket milking machine is designed for farmers who have many goats and sheep. You can milk up to 20 goats and sheep per hour.
The noise level in this milking machine reaches 55 dB, this is not very quiet, goats and sheep need some time to get used to it, but the high noise level is due to the low-speed engine and large pump. The wheels in the UID-20 M115 two goats in one bucket milking machine are made of reliable plastic and solid rubber. These wheels are not afraid of rust, unlike metal counterparts. The bucket cover in such a device is made of polycarbonate with 3 outlets and a paired pulsator is installed on it (1 channel separately for each accessory for a goat).

The device for milking two goats in one bucket UID-20 M115 has a capacity of 22.5 cubic meters / hour. The pump is located between two side plates, and its width is 115 mm, the pump is oil. The engine has a power of 750 W, it has low speed, traction at 1500 rpm.

Operation of the milking machine UID-20 M115 two goats in one bucket
The device can be used non-stop for an hour, if necessary, it can work for 2-3 hours. If you use the device for more than an hour, you need to check the temperature regime. This device can be used all year round, but at temperatures below +5C the oil in the pump will thicken, for the pump to work correctly, some time is needed to warm up the device before connecting it to the milking buckets.