Milking machine KhZDO UID-20 M115 Euro

Milking machine KHZDO UID-20 M115 Euro

Complete set:
Milking cups are completely metal;
Collector with a plastic base for 240 ml;
Bucket for 20 l aluminum;
Bucket lid is polycarbonate;
Milking system is in pairs.

Standard and familiar to us execution of the European apparatus of milking equipment for the hanging part. Milking cups are made entirely of metal, without plastic inserts. The collector is enlarged, designed for high-yielding cows. The base of the collector is made of durable and high-quality plastic, in case of a fall or impact, nothing will happen to it. The bucket lid is made of polycarbonate and has a self-clamping gasket with three outlets.

The UID-20 M115 Euro milking machine has a capacity of 22.5 cubic meters per hour. The pump between the two side plates is 115 mm wide, and the pump itself is oil. The engine has a power of 750 W, it is low-speed, traction at 1500 rpm, because of this its torque is greater than that of other models, due to this it scrolls the pump itself more. The wheels in the UID-20 M115 Euro milking machine are made of reliable plastic and solid rubber. This type of wheels perfectly replaces metal analogues, which begin to rust over time.
The UID-20 M115 Euro milking machine reaches 55 dB in noise level, it is not very quiet, the cows need time to get used to it, but the high noise level is justified by the low-speed engine and a large pump.

Operation of the UID-20 M115 Euro cow milking machine
The machine can operate non-stop for 1 hour, if necessary, it can operate up to 2-3 hours. After operation, after an hour, it is necessary to look at the temperature regime. This machine can be used all year round, but at temperatures below +5C, the oil in the pump can thicken, for the pump to operate correctly, it is necessary to warm it up for half a minute before connecting it. It is recommended not to keep the milking machine outside at low temperatures, for a longer operating time.