Milking machine KhZDO UID-20 M115 Euro aluminum

Milking machine KhZDO UID-20 M115 Euro aluminum

Complete set:
Stainless steel milking cups;
140 ml collector with aluminum base;
20 l aluminum bucket;
Aluminum bucket lid;
Paired milking system.

This set is perfectly adapted to our cows. Since this set includes everything completely metal, reliable, but the milking system is paired.
The lid in the milk can is aluminum, made with 2 outlets, the paired pulsator is placed on the lid through a tee. One outlet is connected to the lid from the side and the paired pulsator is inserted, and a vacuum hose is connected on top of it. The milk outlet is put on the other outlet using an adapter.

This milking machine is designed for farmers with a large herd of cows. The milking machine UID-20 M115 Euro aluminum has a capacity of 22.5 cubic meters / hour. The pump is located between two side plates and its width is 115 mm, the pump is oil. The engine power is 750 W, and the engine itself is low-speed, traction at 1500 rpm. Because of this, it has a higher torque than other milking machines, due to this, it rotates the pump itself more. The pump is designed to operate at 1500 rpm. With the same power as other machines, but the engine has more traction, so the vacuum performance is 2-3 times higher.

One of the advantages of the milking machine UID-20 M115 Euro aluminum is its wheels, they are made of high-quality reliable plastic with solid rubber. This machine for milking cows is slightly noisy, 55 dB, this is not very quiet, the cows need some time to get used to it, but the high noise level is not just like that, but because it is low-speed and has a large pump.

Operation of the milking machine UID-20 M115 Euro aluminum

The machine can operate continuously for 1 hour, if necessary, it can work up to 2-3 hours. After an hour of operation, it is necessary to check the temperature regime. Milking machine UID-20 M115 Euro aluminum can be used all year round, but at temperatures below +5C the oil in the pump may thicken, for the pump to work properly, it is necessary to warm it up for half a minute before connecting it to the milking buckets. It is recommended not to keep the milking machine outside at low temperatures.