Electroshepherd installation and configuration: step by step
Electroshepherd is a great solution for farmers who want to organize effective management of their animals in the pasture. However, for the system to work correctly and efficiently, it is important to correctly install and configure it. This article will guide you through the key stages of installing an electric herder and also provide useful tips for setting up the system.
Step 1: Preparing the installation site
The first step in installing an electric herder is to select an area for fencing and preparation of necessary materials. Check the boundaries of the pasture to determine where the fence will be. Calculate the number of wires and poles based on the length of the perimeter. Smaller areas may require additional materials such as insulators, wire tension racks and of course the pulse generator.
- Site Selection : Make sure the area is free of large obstacles (trees, large stones) that can interfere with the tension of the wires. It is preferable that the fence does not cross streams or other water obstacles, as this can affect the effectiveness of the grounding.
Step 2: Install the posts
First, install the posts on the perimeter pastures The racks should be located at an equal distance from each other, usually 3-5 meters. It is also important that the racks are securely fixed in the ground. For more rigid structures, metal posts can be used, but for most farms, plastic or wooden posts will work.
- Height of posts : The height depends on the type of animals you intend to keep. For cows and horses, the wire should be stretched at a height of about 100-130 cm. For sheep and pigs - at a height of 20-60 cm.
Step 3: Installation of insulators
Insulators are attached to the posts and ensure that the wire does not touch the posts and does not lose current. Place the insulators on each rack at the desired height. For a multi-row fence, install multiple insulators on each post so that multiple levels of wire can be pulled.
Step 4: Wire Tension
Once the posts and insulators are in place, you can begin tensioning the wire or tape. Start on one side and stretch the wire around the perimeter of the fence. Make sure the wire is stretched straight without any slack as this can reduce the efficiency of the system.
- Connecting wires : If the perimeter of the fence is very large, you may need to connect several pieces of wire. To do this, use special connectors or clamps for fastening to ensure a reliable contact.
Step 5: Installation of grounding
One of the most important stages is the correct installation of grounding. Without good grounding, the electric shepherd will not work effectively. To do this, you will need a grounding pin, which is driven into the ground to a depth of at least 1 meter. It is best to choose a site with moist soil, as moisture improves the conduction of current.
If the pasture is large, you may need several grounding pins installed at different points of the fence.
Step 6: Connect the generator< /h4>
When the fence is installed and the grounding is ready, you can connect the pulse generator. The generator is connected to the fence and ground wires. Check that all connections are secure and that there is no current leakage.
Step 7: Test the system
Be sure to test the system before releasing animals into the fenced area. Use a special shepherd's tester to make sure that the current runs the entire length of the fence. Check all connections to make sure they are working properly.
Useful tips for installing an electric shepherd
Check the system regularly : Even if the electric shepherd is working properly, it is important to periodically check it for damage. Bad weather, falling trees and other factors can damage the wire or poles.
Proper grounding : This is one of the most important aspects. Make sure that the grounding remains in good condition at all times and renew it if necessary.
Use quality materials : The wire, insulators and generator should be of good quality, for the system to serve for many years. You should not save on such things, because it directly affects the safety of animals and the efficiency of the pasture.
Conclusion
Installing an electric shepherd is not a complicated process, but requires attention to detail. Correct installation and adjustment of the system will ensure its smooth operation and help to effectively manage animals on the pasture. Make sure you select the correct materials and follow all installation recommendations to achieve maximum performance.
Popular Keywords: how to install an electric herder, electric herder installation, electric herder for farm, setup electric shepherd.
