Diesel pump IRON-50 220-50 (Italy)

IRON-50 220-50 Diesel Pump (Italy)

Description

The AG-35 pump is durable, wear-resistant and has a powerful, efficient pump, which ensures long-term uninterrupted operation and high-quality pumping of diesel fuel. These and many other advantages fully justify the cost of this model. The pump is equipped with a built-in coarse filter, as well as a bypass valve designed to bypass fuel in case the dispensing tap is closed when the mechanism is on. The main element of the AG-35 model is a 24-volt self-priming vane electric pump with a capacity of 50 l / min, which allows pumping fuel in the absence of 220 V power supply. The motor is equipped with a 30 A fuse. There is also IP55 moisture protection. The AG-35 model is used at temperatures from -20 to +50 degrees and can work continuously, maintaining its performance characteristics for up to 30 minutes, developing an output pressure of up to 1.2 Bar. During operation, the noise level does not exceed 80 dB. In the "dry" suction mode, the model is able to lift fuel from a depth of up to 2 meters. The pump operates with a diesel engine. It is prohibited to use it for pouring water, gasoline, alcohol, gas or kerosene. The weight of the model is 4.7 kg.

Technical specifications:

• Performance, l/min – 50
• Fuel type – Diesel
• Outlet pressure, Bar – 1.2
• Weight, kg – 4.5
• Power supply, V – 220
• Current, A – 9-17
• Manufacturer – Gespasa (Spain)
• Operating temperature – -20/+50°С
• Power cord, m – 2
• Dry suction height, m – 2.5
• Bypass valve – Yes
• Inlet/outlet opening – 1' x 1'
• Max. continuous operation time, min – 30
• Moisture protection level – IP55
• Noise level, dB – 75
• Prohibited liquids – Gasoline, kerosene, water
• Warranty period – 12 months