Milking machine Protek AID-1 Euro 240 polycarbonate

Milking machine Protek AID-1 Euro 240 polycarbonate

The complete set of the milking machine AID-1 Euro 240:
metal milking cups;
240 ml collector with a plastic base
20 l aluminum bucket;
polycarbonate bucket lid;
paired milking system.
Classic execution of the European model of milking equipment for the hanging part. Milking cups are completely metal, no plastic. The increased volume collector of 240 ml is specially designed for high-yielding cows. The base of the collector is made of high-strength plastic, which will not happen if dropped or hit.
The polycarbonate bucket lid comes with a self-clamping gasket and has three outlets, that is, the hoses and pulsator are separate and connected without adapters. Paired milking system. The principle of operation of the paired milking system is very simple, the pulsators alternately squeeze the two left and two right lobes of the udder, simulating manual milking, due to this the cows are more stable. When there is a paired compression, then during the process two milking cups are slightly raised, while the other two cups are lowered, then the cups change position, so the system begins to swing and due to this the udder is massaged, and it is due to this process that even the most tight cows begin to give milk. This type of milking is considered more correct and humane. Nominal service of the milking machine AID-1 Euro 240 up to 10 cows per hour.

The main advantage of the milking machine AID-1 Euro 240 polycarbonate is its virtually silent operation. The noise level of this device does not exceed 40-45 dB, while other milking units produce more than 55 dB. When the device is turned on, you can talk on your mobile phone without any disturbances, such a quiet device will appeal to all cows, especially those cows that are afraid of noise.
Another important advantage is the wheels on the milking unit. With their help, you can easily move the unit from place to place.