Milking machine Protek AID-1 Plastic

Milking machine Protek AID-1 Plastic

The complete set of the milking machine AID-1 plastic:

plastic milking cups;
collector with plastic base;
collector cover made of polycarbonate;
20 l aluminum milking bucket;
milking bucket cover made of plastic;
synchronous milking system.

The milking machine AID-1 plastic has an oil-type milking unit with a 750 W motor. The advantages of an oil pump can be discussed at length, but the most important thing about it is its durability, because with proper care of the pump (lubrication with oil 1-2 times a month), the pump will serve you for about 9-10 years, and this is much more than devices with a dry type of pump. With such an installation, you can service up to 10 cows per hour.

The AID-1 plastic milking machine includes many plastic parts. The milking bucket is made of aluminum, and the bucket lid is plastic, as well as the base of the collector in this device is plastic, but the collector lid is made of polycarbonate. This is due to the fact that when milking, you need to see when the cow has run out of milk, and with the help of a transparent polycarbonate lid this is easy to do.
The AID-1 plastic milking machine for cows comes with 2-meter hoses made of food-grade silicone. If you need to extend the hose, you can do it, but only if it is a hose between the unit and the bucket, but the hose connecting the cups and the bucket cannot be extended. This is due to the fact that the length of the brushes for cleaning the hoses is designed for a certain length, and if the hose is extended, it simply will not be cleaned.
Milking machine for cows AID-1 plastic, comes with a synchronous milking system. This system works as follows: all four cups are connected to the distributor and squeezed simultaneously. Milking machine AID-1 plastic, designed for several calm cows.